Відео

what a waste, all throughout the video your hand has to be hidden, it could have been video but, it is missing

Wow only one part that sucks

No se ve como lo armas solo tus manos

Megusta la 420 es calidad de makina

Terrible leaf vac. Handle vibrates a lot. Cumbersome to change and a back breaker to use as a vacuum. Powerful blower.

Your camera blocked 3/4 of the video. Move it ABOVE the carb.

I'm pretty sure that you did a great rebuild, but your hand blocked most of the video😊

Thanks buddy I still don't know a damn bit more about fixing a dimmer switch. But in case I ever need to change the head light switch, thanks.👍

Let the toro idle for a few minutes so it won’t die great video

do No need sleeves for non intercooler?

Thanks

This is a video about changing the headlight switch, not the dimmer switch. The dimmer switch is on the steering column and is the switch that turns the high beams on and off and runs the windshield wipers and turn signals. That's not a dimmer switch you just worked on. I don't know how you managed to get a headlight switch replacement being you think it's called the "DIMMER" switch.

Thanks,, Do you happen to know the HP or the displacement?

These are actually pretty good trimmers for the money

Thank you, you saved me a big $$$$$$$

Very helpful couldnt figure out for months now i know it

Can you send me a link to an OE ignition coil? I have the same trimmer and cannot find one that has the 2 contacts for the on/off switch.

Have one of these left behind by a prior homeowner presumably inoperable. Changed fuel with fresh non-ethanol and 40:1 mix which I had just made up for some other equipment. This product specs 50:1, and it does seem to run quite lean. Like many others it seriously bogs on throttle when the choke is off, so I have to find the sweet spot with the choke lever to get it to run half decent. Has the orig Chumpian plug, so for shitz n' giggles I'll change that out and adjust the fuel ratio. Good to know this is a common issue with the carb. I know you can remove the plastic plugs to adjust it, but that sounds like a P.I.T.A . I'll try the easy stuff first

Sounds sick the lt5 stock

Super sound. Love it.

Worst amateur sloppy video ever seen on YT. And the speaker is a mumbling moron!

Couldn't see much. Camera wasn't in the right place

Mine flicker randomly so glad I got a more commonly worked on vehicle 👌🏼

Nice effort. Your hand is constantly blocking the view of what you are doing. Set the camera on the other side.

Could be a good video if we could see the actual gasket placement instead of your hands.

Hello!!!fs88 trimmer information ??

Just got done changing calipers, rotors, pads, and hoses. On a 2008 Expedition down to metal on one side easiest way to push in pistons is to crack the bleeder so not pushing contaminated brake fluid through the ABS system.

I have a 2011 model and 10 years later it’s still going strong

Good try. Too bad the important parts were hands. Try filming above. My toro guy wants 50 to fix. Yeah we all have electro sonic cleaners. Good vid but can't see needed stuff. Gonna wing if I can rebuild a 780 Quadra jet I'll figure it out. Part number bs. Called Walbro. Waste of time

Nice vid of back of hand. 😠. Wasted my time.

Is that a gas job?

You have to call video how to replace dimer no how to fix

Your hand was in way

Did not show putting the new pads in. Too bad. That’s important

"And then, this" we can see squad, just back of your hand or nothing useful. Wanted see the gasket order, completely useless. And get rid of the damn wind chimes!

Buy .. not by

Made in Japan or China. Been using Tanaka's since the 80s and 90s. Weed trimmer still working beautifully one spark plug change in 30 years. Tank has a crack. Bought another one 340. Plenty of power and not as heavy as yours. Only by the ones made in Japan

I've gotten two of these units the same model in color from thrift stores basically a month apart. I paid $4.99 each. They work flawlessly I just cleaned them. I tore them down and cleaned even the blades of the fan.

thanks...very helpful

Always use brake caliper lube or anti seize on the back side of the brake pads and also on the caliper bracket where the pads ride.

Stand back from the subject of your photograph ! Classic Psychotic Camera Waving Video.. we wanted to look at this.. but got car sick.

Kudos on torquing the lug nuts, however it should ALWAYS be done in a star pattern, NOT in a circle.

By now you have kids, and have given up on fixing carbs. My neighbor dropped this thing off for me to fix. Made in 1993. Yep. Before we were gifted with you. Anyway, lots of good info. So thanks. Some random guy in Florida.

I got myself a T-23 model and it looks in every respect just like your. Though I can't get it to spark but the coil resistants seem ok; you mentioned that you have had the capacitor replaced (common problem) on yours, would you might sharing that details with me like: how to telll it was the capacitor and how to locate a replacement?

I paid $187 for mine but not refurbished 👍🏼✅

We’re did you by this string trimmer

I have that exact model, and had a gasket between the carb and engine that was not included in a ny kit. What did you do? VERY good video! Thank you.

Most of the time ,your hands are blocking the work. Sorry but not much help.

TBC Tanaka no me prende

zoom in a little closer, so that it can't focus at all.